پیوست پ (آگاهیدهنده) نمونه گزارش
زمان تقریبی مطالعه: 3 دقیقه
پیوست پ
(آگاهیدهنده)
نمونه گزارش
نمونهها مطابق روش شرح داده شده در این استاندارد آماده شد. شش منشور ملات برای شش آزمون آماده شد و شش ویژگی در جدول۱ گزارش شد. نمونهها طبق این استاندارد تا مقاومت مکعبها به حداقلMPa۲۰ برسد عملآوری شد. نمونهها در محلول سولفات در دمای°C(۲۳/۰±۲/۰) به مدت۱۸ماه نگهداری شد. نتایج آزمون در جدول۱ گزارش شده است.
مخلوط آزمون | |
|---|---|
شرکت سیمان... ASTM C150 k، نوعII (g) | ۳۷۰ |
شرکت سیمان..... ASTM C989 (g) | ۳۷۰ |
ماسه دانهبندی شده(g) | ۲۰۳۵ |
آب (ml) | ۳۶۳ |
مخلوط آزمون: نسبت آب/سیمان | ۰/۴۹۰ |
روانی٪ | ۱۲۴ |
مقاومت۲۴ساعته (اختیاری) | ۲۹۷۰ |
مخلوط کنترل آب (ml) | ۳۵۹ |
مخلوط آزمون نسبت آب/سیمان | ۰/۴۸۵ |
کنترل مخلوطکن، جریان٪ | ۱۲۲ |
مشخصه نمونه | ۱ | ۲ | ۳ | ۴ | ۵ | ۶ | میانگین | انحراف استاندارد | انحراف معیار |
|---|---|---|---|---|---|---|---|---|---|
سن | تغییر طول(٪) | ||||||||
شروع هفته | – | – | – | – | |||||
۱هفته | ۰/۰۱۱ | ۰/۰۱۰ | ۰/۰۱۱ | ۰/۰۱۰ | ۰/۰۱۰ | ۰/۰۱۱ | ۰/۰۱ | ۰/۰۰۱ | ۵/۲۱۶ |
۲هفته | ۰/۰۰۹ | ۰/۰۰۹ | ۰/۰۰۹ | ۰/۰۰۹ | ۰/۰۰۸ | ۰/۰۰۸ | ۰/۰۱ | ۰/۰۰۱ | ۵/۹۵۸ |
۳هفته | ۰/۰۱۵ | ۰/۰۱۴ | ۰/۰۱۴ | ۰/۰۱۵ | ۰/۰۱۴ | ۰/۰۱۵ | ۰/۰۱ | ۰/۰۰۱ | ۳/۷۷۷ |
۴هفته | ۰/۰۱۳ | ۰/۰۱۴ | ۰/۰۱۳ | ۰/۰۱۳ | ۰/۰۱۲ | ۰/۰۱۳ | ۰/۰۱ | ۰/۰۰۱ | ۴/۸۶۵ |
۸هفته | ۰/۰۲۲ | ۰/۰۲۲ | ۰/۰۲۲ | ۰/۰۲۲ | ۰/۰۲۴ | ۰/۰۲۳ | ۰/۰۲ | ۰/۰۰۱ | ۳/۷۱۸ |
۱۳هفته | ۰/۰۲۵ | ۰/۰۲۵ | ۰/۰۲۵ | ۰/۰۲۶ | ۰/۰۲۴ | ۰/۰۲۶ | ۰/۰۳ | ۰/۰۰۱ | ۲/۹۹۱ |
۱۵هفته | ۰/۰۲۰ | ۰/۰۲۱ | ۰/۰۲۱ | ۰/۰۲۰ | ۰/۰۱۹ | ۰/۰۱۹ | ۰/۰۲ | ۰/۰۰۱ | ۴/۴۷۲ |
۴ماه | ۰/۰۲۷ | ۰/۰۲۸ | ۰/۰۲۹ | ۰/۰۲۸ | ۰/۰۲۷ | ۰/۰۲۷ | ۰/۰۳ | ۰/۰۰۱ | ۲/۹۵۱ |
۶ماه | ۰/۰۳۰ | ۰/۰۳۱ | ۰/۰۳۲ | ۰/۰۳۲ | ۰/۰۳۰ | ۰/۰۲۹ | ۰/۰۳ | ۰/۰۰۱ | ۳/۹۴۹ |
۹ماه | ۰/۰۳۳ | ۰/۰۳۴ | ۰/۰۳۶ | ۰/۰۳۵ | ۰/۰۳۴ | ۰/۰۳۳ | ۰/۰۳ | ۰/۰۰۱ | ۳/۴۲۲ |
۱۲ماه | ۰/۰۴۲ | ۰/۰۴۵ | ۰/۰۴۵ | ۰/۰۴۲ | ۰/۰۴۴ | ۰/۰۴۳ | ۰/۰۴ | ۰/۰۰۱ | ۳/۱۶۹ |
۱۸ماه | ۰/۰۴۹ | ۰/۰۵۰ | ۰/۰۵۰ | ۰/۰۵۱ | ۰/۰۵۱ | ۰/۰۴۹ | ۰/۰۵ | ۰/۰۰۱ | ۱/۷۸۹ |
متوسط۶ماه شش منشور:۰/۰۳٪؛ | |||||||||
کتابنامه
[1] Rosnerl, J. C., Chehovits, J. G., and Wharburton, R. G., “Sulfate Resistance of Mortars Using Fly Ash as a Partial Replacement for Portland Cement,” Proceedings, Sixth International Conference on Utilization of Fly Ash, Reno, March 1982.
[2] Mather, Bryant, “Laboratory Tests of Portland Blast-Furnace Slag Cements,” Journal of the American Concrete Institute, Proceedings, Vol 54, 1957, pp 205–232.
[3] Biczok, I. Concrete Corrosion, Concrete Protection, Chemical Publishing Company, New York, 1967, p 178.
[4] Miller, D. G., and Snyder, C. G., “Report on Comparative Short-Time Tests for Sulfate Resistance of 121 Commercial Cements,” Report of Committee C-1 on Cement, Appendix III, Proceedings, ASTM, Vol 45, 1945, pp 165–194.
[5] Wolochow, D., “Determination of the Sulfate Resistance of Portland Cement,” Report of Committee C-1 on Cement, Appendix,Proceedings, ASTM, Vol 52, 1952, pp. 250–363.
[6] Wolochow, D., “A Lean Mortar Bar Expansion Test for Sulfate Resistance of Portland Cements,” Appendix A, Proceedings, ASTM, Vol 52, 1952, pp 264–265.
[7] Mather, Katharine, “Tests and Evaluation of Portland and Blended Cements for Resistance to Sulfate Attack,” ASTM STP 663, 1978, pp 74–86.
[8] Mehta, P. K., “Evaluation of Sulfate-Resisting Cements by a New Test Method,” Proceedings of the American Concrete Institute, Vol 72, Oct. 1975, pp 573–575.
[9] Polivka, M., and Brown, E. H., “Influence of Various Factors on Sulfate Resistance of Concretes Containing Pozzolan,” Proceedings, ASTM, Vol 58, 1958, pp 1077–1100.
[10] Mehta, P. K., and Polivka, M., “Sulfate Resistance of ExpansiveCement Concretes,” American Concrete Inst SP-47, 1975, pp
[11] Regourd, M., “The Action of Sea Water on Cements,” Annales de L’Institut Technique du Bâtiment et des Travaux Publics, Vol 329, 1975, pp 86–102.
[12] Mehta, P. K., and Haynes, H. H., “Durability of Concrete in Sea Water,” Proceedings of the American Society for Civil Engineers, Vol 101, No. ST 8, 1975, pp 1679–1686.
[13] Campus, F., “Essais de resistance des Mortiers et Betons à la Mer (1934–1964),” Silicates Industriel, Vol 28, 1963, pp 79–88.
[14] Bakker, R., “On the Cause of Increased Resistance of Concrete Made From Blast Furnace Cement to the Alkali Silica Reaction and to Sulfate Corrosion,” (English Translation of doctoral thesis at RWTH 1980), Maastricht, 1981, 144 pp.
[15] Miller, D. G., and Manson, P. W., “Tests of 106 Commercial Cements for Sulfate Resistance,” Proceedings, ASTM, Vol 40, 1940, pp 988–1001.
[16] Lea, F. M., The Chemistry of Cement and Concrete, Third Edition, Chemical Publishing Co., Inc., New York, NY, 1970, p 727.
[17] Brown, P. W., “An Evaluation of the Sulfate Resistance of Cements in a Controlled Environment,” Cement and Concrete Research. Vol 11, 1981, pp 719–727.
[18] Patzias, Terry, “Evaluation of Sulfate Resistance of Hydraulic- Cement Mortars by the ASTM C1012 Test Method. Concrete Durability, Katharine and Bryant Mather International Conference, American Concrete Institute SP-100, Vol 2, 1987, pp 2103–2120.
[19] Patzias, T., “The Development of ASTM C1012 with Recommended Acceptance Limits for Sulfate Resistance of Hydraulic Cement,” Cement, Concrete, and Aggregates, CCA GDP, Vol 13, No. 1, Summer 1991, pp. 50–57.
مصالح مرتبط با بند
پیوست پ (آگاهیدهنده) نمونه گزارش
گفتوگوی عمومی انجمن درباره بخش A3
نظر شما درباره این بند با نام شما در انجمن عمومی منتشر میشود و دیگران میتوانند آن را بخوانند و پاسخ بدهند.